Roxseal Instant Adhesives
To seal and lock threads joints from pressure of gas, air, water, oil, oxygen and industrial fluids.
Replace hemp and PTFE tapes, they are heat and vibration resistant. Different locking grades available.
Certified according to diverse international regulations.
To lock studs, nuts, screws and any threaded fasteners.
Avoid loosening caused by vibrations, mechanical and temperature shocks. Prevent fretting corrosion and seizures.
Available in different locking and strength grades.
To seal flat mating surfaces and joint flanges of pumps, motor gears and differential boxes, motor flanges.
Replaces pre-formed gaskets and insure sealant effects with working tolerances of tenth of mm.
Allow metal to metal contact and avoid loosening during time. Form a flexible and/or elastic gasket resistant
to vibrations, heat, oils and industrial fluids. Normal tools allow disassembling of the parts.
To lock and fit bushing, bearings, sleeves, pin hubs, pulleys, gears and other cylindrical parts.
Increase the strength of press fit parts and retain loose fitting parts.
Allow larger machining tolerances. Prevent fretting corrosion and loosening in the time, eliminate stress
distortion by press and shrink fits. Seal against fluid leakage.
Cyanoacrylate adhesives for instant and structural bonding of rubber, metal parts, ceramic, leather and plastics.
To obtain optimum results is essential that the surfaces to be bonded fit perfectly together. Best results can be
obtained with joints gaps less than 0.1mm or 0.2mm maximum with special grades. The operating temperature range
is between -50°C and +80°C.
Provide high strength structural fits, particularly resistant to mechanical efforts and various chemicals.
They are suitable to bond metal and ceramic parts, wood and some plastics. They are supplied in the practical
dual-cartridge dispenser. The curing is obtained by chemical reaction between the two components.
Fixture time from 5-10 minuets to some hours. Heat accelerates the curing. Temperature resistance
is between -30°C and +80°C.
Polymerise in few seconds by irradiation under ultraviolet light, creating a transparent film that do not
loose its clear properties during time. They are designed to bond glass, crystal, metal parts and some
plastics in the operating temperature range is between -50°C and +80°C.
A range of cleaners, primers and activators for the Roxseal range of adhesives and sealants.
Lamps, Lighting, Silicone and EPDM Rubber, Electronic Products
Rubber