Luminaire Fittings.
Explosion-Proof Luminaires - Model IZXZII
Description
Two-piece die-cast aluminium body, painted in a powder colour, containing all electrical parts. The EPDM rubber gasket
has a diametre of 8mm, fastened between two parts of the body by stainless steel screws, ensuring a protection of IP65
and a high resistance against dust and spraying water.
The optical part is created by anodised and sealed aluminium reflector D (wide beams of rays). Protection IP65 is provided with a cover
made of tempered glass (marking DX) with a gasket fixed to the lower bottom of the reflector bt stainless steel clips.
Connection to a power supply is ensured by connection system GESIS (!P65). The version with additional halide lamp 250W, E27 (included) can be produced on request.
The additional lamp is operating whenever the luminaire is switched on and is disconnected as soon as the discharge lamp reaches 80% of average luminous flux.
The luminaire with additional lamp is not produced in version T60.
Parameters
| Nominal voltage | 230 V / 50 Hz |
| Lamps | discharge lighting |
| Protection | IP 65 |
| Protection class | I |
| Wiring method | system TN-S triple-wire into terminal box 2,5 mm2 |
| Packing method | separately in carton |
| Suitability for direct mounting on normally inflammable supports | NO |
| Surrounding temperature ta | -20°C ... +40°C |
Types
[length] = [width] = [high] = [diameter] = mm; [weight] = kg
Links
