Luminaire Fittings.
Explosion-Proof Luminaires - Model RMS
Description
The luminaire body is made of deep pressed stainless steel of 0.8mm thickness. The cover is made of stainless steel
with a thickness of 1mm. The thickness of the tempered glass is 4mm and is sealed onto the frame by a continous silicone
ring. The frame is closed by a with tight fitting screws and a stainless steel hinge on the opposing side.
A special cross-section tightness gasket in EPDM rubber is located in a housing channel between body and frame.
The electrical equipment is installed on a white reflector which creates an optical part of the luminaire. Wiring by PVC
90°C rigid cable. The lampholder is suitable for fluorescent two-pin lamps. Anti-loosing 2P+E (L-N-E) terminal strip.
Parameters
| Nominal voltage | 230 V / 50 Hz |
| Lamps | fluorescent lighting |
| Protection | IP 65 |
Types
[length] = [width] = [high] = [diameter] = mm; [weight] = kg
Links
