Luminaire Fittings.
Special Purpose Luminiares - Model 1T
Description
This luminaire is essential for warehouses, work-rooms, areas with polluted environment, plants,
industrial kitchens and garages, etc.
The luminaire body is made up of thermoset-polyester fibreglass. luminaires are standardly equipped with stainless steel
clips and a polycarbonate diffuser. The reflector that carries all the electric components is made up of a two-side coated steel plate
with a removable polished reflector that can be mounted. Luminaire models T-30, 1-25 are standardly equipped with special
lamps (linear lamp Thermo Ø = 38 mm).
Parameters
| Nominal voltage | 230 V / 50 Hz |
| Lamps | fluorescent lighting |
| Protection | IP 65 |
| Protection class | I |
| Connection method | system TN-S triple-wire into terminal block 2,5 mm2 |
| Packing method | separately in carton |
| Usability for direct mounting on ordinarily inflammable supports | YES |
Types
[length] = [width] = [high] = [diameter] = mm; [weight] = kg
Luminaire Fittings.
Special Purpose Luminiares - Model IZT
Description
The Basic body is made of a extruded aluminium alloy profile in gloss grey finish. The frame incorporates matte anodised
extruded aluminium alloy. Fastening clips are made of extruded aluminium alloy and can be opened without tools.
It is closed with tempered glass (hardness 20J). The high tightness level is provided with a
silicone-profiled gasket. The reflector is made of high polished anodised aluminium and is equipped with
Pg 13,5 (M20 x 1,5) polyamide cable outlet and M20 x 1.5 closing gland.
Parameters
| Nominal voltage | 230 V / 50 Hz |
| Lamps | fluorescent lighting discharge lighting |
| Protection | IP 65 |
| Protection class | I |
| Connection method | system TN-S triple-wire into terminal block 2,5 mm2 |
| Packing method | separately in carton |
| Usability for direct mounting on ordinarily inflammable supports | YES |
| Surrounding temperature for fluorescent lamp ta | -25 ... +40°C |
| Surrounding temperature for discharge lamp ta | -5 ... +40°C |
Types
[length] = [width] = [high] = [diameter] = mm; [weight] = kg
Luminaire Fittings.
Special Purpose Luminiares - Model TRITON T60
Description
The Triton T60 is essential for Workrooms, factories, warehouses etc. Two-piece die-cast aluminium body
painted in powder colour contains all electrical parts. Protection IP 65 and high resisence against dust and spraying
water ensures the gasket stays fastened between stainless-steel screws .
The Optical part is created by anodised and sealed aluminium reflector C (for narrow beam of rays) or D (for wide beam of
rays) for IP 20. Model IP65 is provided with a cover made of tempered glass (CX/DX) with gasket fixed to the lower part
of reflector.
Connection to a power supply is ensured by three-core cable. The connector can be supplied
for model IP20 on request.
An additional halide lamp (250w, E27) can be produced as Triron BO320.
Parameters
| Nominal voltage | 230 V / 50 Hz |
| Lamps | discharge lighting |
| Protection | IP 65 |
| Protection class | I |
| Wiring method | sít TN-S three-wire into terminal block 2,5 mm2 |
| Packaging | Individually in cartons |
| Aplicability to normaly inflammable background direct mounting | YES |
| Surrounding temperature ta | -25°C ...+40°C
|
Types
[length] = [width] = [high] = [diameter] = mm; [weight] = kg
Links
